TM 9-2320-366-34-3
16-71. M1089 FOLD CYLINDER REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Underlift assembly lowered to ground (TM 9-2320-366-
10-2).
Engine shut down (TM 9-2320-366-10-1).
Hydraulic reservoir supply and return valve closed (TM
9-2320-366-10-2).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Tools and Special Tools (Cont)
Wrench Set, Crowfoot Ratcheting (TM 9-2320-
366-20)
Materials/Parts
Cap and Plug Set (Item 17, Appendix C)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 30, Appendix C)
Packing, Preformed (2) (Item 236, Appendix F)
a. Removal.
CAUTION
Cap or plug hydraulic hoses and fittings to
prevent contamination of hydraulic system.
Failure to comply may result in damage to
equipment.
NOTE
Tag hydraulic hoses and connection points
prior to disconnecting.
(1) Disconnect hoses (1 and 2) from fold cylinder (3).
16-431
