TM 9-2320-366-34-3
(46) Remove two screws (82) and washers (83) from cab
front support mount (81).
(47) Perform steps (45) and (46) on left side cab front support
mount.
CAUTION
Raise cab straight up to clear radiator.
Failure to comply may result in damage to
equipment.
(48) Remove cab (7) from vehicle.
(49) Position cab (7) on cab maintenance stand.
(50) Remove spreader bar, cargo sling, and rubber sheet
from cab (7).
b. Disassembly.
NOTE
Perform step (1) on WTEC II vehicles.
(1) Remove three screws (1), washers (2), and Vehicle
Interface Module (VIM) (3) from dashboard (4).
Change 1
15-13
