TM 9-2320-366-34-3
15-2. CAB REPLACEMENT (CONT)
CAUTION
Use spreader bar and place sheet rubber on
cargo sling to prevent damage to cab roof.
Failure to comply may result in damage to
equipment.
(44) Lower cab door windows and install cargo sling through
rear section of cab doors (79).
WARNING
•
Standard cab weighs approximately 1400 lbs
(636 kgs).
M1093/M1094 cab weighs
approximately 1700 lbs (772 kgs). Attach a
suitable lifting device prior to removal.
Failure to comply may result in injury to
personnel or damage to equipment.
•
Cab may swing forward slightly when screws
are removed. An assistant is required to
steady cab. Failure to comply may result in
injury to personnel or damage to equipment.
NOTE
Left and right side cab front support mounts
are disconnected the same way. Right side
shown.
(45) Remove four screws (80) from cab front support mount
(81).
15-12
Change 1
