TM 9-2320-366-34-3
b. Installation.
WARNING
Underlift and stiffleg assembly weighs
approximately 4000 lbs (1816 kgs). Attach
suitable lifting device prior to installation.
Failure to comply may result in injury to
personnel or damage to equipment.
NOTE
Left and right side of underlift and stiffleg
assembly is connected the same way. Left
side shown.
(1) Position underlift and stiffleg assembly (1) on vehicle
with six screws (2), 12 washers (3), and six self-locking
nuts (4).
(2) Position eight bolts (5), 16 washers (6), and eight self-
locking nuts (7) in underlift and stiffleg assembly (1).
(3) Perform steps (1) and (2) on right side of underlift and
stiffleg assembly.
(4) Tighten self-locking nuts (7) and 12 self-locking nuts (4)
to 152-168 lb-ft (206-227 N·m).
NOTE
Left and right side shock absorber brackets
are installed the same way. Left side shown.
(5) Position shock absorber bracket (8) on frame (9) with
four screws (10) and self-locking nuts (11).
(6) Tighten self-locking nuts (11) to 195-240 lb-ft (265-325
N·m).
16-413
