TM 9-2320-366-34-3
16-63. 30K WINCH ASSEMBLY REPLACEMENT/REPAIR (CONT)
(8) Remove two screws (18), lockwashers (19), and
hydraulic motor (13) from brake housing (20). Discard
lockwashers.
(9) Remove preformed packing (21) from hydraulic motor
(13). Discard preformed packing.
(10) Place drain pan under gear end cover (6).
(11) Remove plug (22) from gear end cover (6).
(12) Position plug (22) in gear end cover (6).
WARNING
Drum weighs approximately 350 lbs (159
kgs). Attach a suitable lifting device prior
to disassembly. Failure to comply may
result in injury to personnel or damage to
equipment.
(13) Position drum (23) on workbench with brake housing
(20) facing up.
WARNING
Ensure banding strap around 30K winch
is removed carefully. Failure to comply
may result in injury to personnel.
(14) Remove banding strap (7) from drum (23).
(15) Remove 90-degree fitting (16) and 45-degree fitting (17)
from brake housing (20).
(16) Match mark brake housing (20) to motor end support
(24).
CAUTION
Brake housing is under pressure. Loosen
bolts evenly to relieve pressure. Failure to
comply may result in damage to equipment.
(17) Loosen six screws (25) in brake housing (20).
(18) Remove six screws (25), lockwashers (26), and brake
housing (20) from motor end support (24). Discard
lockwashers.
16-354
