TM 9-2320-366-34-3
16-58. M1089 OUTRIGGER BEAM REPLACEMENT (CONT)
CAUTION
Ensure hydraulic tubes pass freely through
cutouts in outrigger beam. Failure to comply
may result in damage to equipment.
NOTE
If the outrigger beam cannot be removed with
ease, perform Step (4). If the outrigger beam
can be removed with ease, perform Step (5).
(4) Cut weld securing mounting pad (7) to support tube (8).
NOTE
Step (5) requires the aid of an assistant.
(5) Remove outrigger beam (1) from support tube (8).
b. Installation.
WARNING
Outrigger beam weighs approximately 175
lbs (80 kgs). Attach suitable lifting device
prior to removal. Failure to comply may
result in injury to personnel or damage to
equipment.
CAUTION
Ensure hydraulic tubes pass freely through
cutouts in outrigger beam.
Failure to comply
may result in damage to equipment.
NOTE
Left and right outrigger beams are installed the
same way. Right side shown.
Step (1) requires the aid of an assistant.
(1) Slide outrigger beam (1) in support tube (2).
(2) Weld mounting pads (3) to support tube (2), if required.
16-310
