TM 9-2320-366-34-3
16-58. M1089 OUTRIGGER BEAM REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Outrigger extended (TM 9-2320-366-10-1).
Engine shut down (TM 9-2320-366-10-1).
Batteries disconnected (TM 9-2320-366-20-3).
Outrigger jack cylinder assembly removed (para
16-56).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Tool and Special Tools (Cont)
Chain, Welded (TM 9-2320-366-10)
Materials/Parts
Pin, Cotter (2) (Item 332, Appendix F)
Personnel Required
(3)
a. Removal.
WARNING
Outrigger beam weighs approximately 175
lbs (80 kgs). Attach suitable lifting device
prior to removal. Failure to comply may
result in injury to personnel or damage to
equipment.
NOTE
Left and right outrigger beams are removed
the same way. Right side shown.
(1) Remove four bolts (1) and two clamps (2) from two
hydraulic clamps (3).
(2) Remove cotter pin (4) from pivot pin (5). Discard cotter
pin.
(3) Remove pivot pin (5) from outrigger extension cylinder
(6).
16-309
