TM 9-2320-366-34-3
(22) Install planetary carrier (17) in swing drive (23).
(23) Install secondary sun gear (24) in planetary carrier (17).
(24) Install race (25), bearing (26), and race (27) on planetary
carrier (17).
NOTE
All three gears are installed the same way.
One gear shown.
(25) Install center spacer (28) in planetary carrier (29).
(26) Install bearing (30) in gear (31).
(27) Install gear (31), two spacers (32), and pin (33) in
planetary carrier (29).
(28) Install roll pin (34) in pin (33).
(29) Perform steps (25) through (28) on two remaining gears
(31).
16-289
