TM 9-2320-366-34-3
16-53. M1089 SWING DRIVE ASSEMBLY REPLACEMENT/REPAIR (CONT)
(10) Install spacer (10) on shaft (5).
(11) Install gear (11) on shaft (5).
WARNING
Adhesive sealant MIL-S-46163 can damage
your eyes.
Wear safety goggles/glasses
when using; avoid contact with eyes.
If
sealant contacts eyes, flush eyes with water
and get immediate medical attention. Failure
to comply may result in injury to personnel.
(12) Apply sealing compound to threads of two screws (12).
(13) Install plate (13) on shaft (5) with two screws (12).
(14) Install preformed packing (14) on hub (3).
(15) Apply sealing compound to ring gear (15).
(16) Install ring gear (15) on hub (3) with match marks
aligned.
(17) Install center spacer (16) in planetary carrier (17).
(18) Install bearing (18) in gear (19).
(19) Install gear (19), two spacers (20), and pin (21) in
planetary carrier (17).
(20) Install roll pin (22) in pin (21).
(21) Perform steps (17) through (20) on two remaining gears
(19).
16-288
