TM 9-2320-366-34-3
16-53. M1089 SWING DRIVE ASSEMBLY REPLACEMENT/REPAIR (CONT)
(6) Remove two screws (4) and swing drive assembly
bracket from swing drive assembly (6).
(7) Install plate (5) in swing drive assembly (6) with two
screws (4).
b. Disassembly.
(1) Remove hydraulic hose (1) from 90-degree fitting (2).
(2) Match mark cylinder housing (3) to end cover (4).
(3) Remove four screws (5), washers (6), and two drive
assembly stops (7) from cylinder housing (3).
WARNING
Cylinder housing is under tension, use care
when removing cylinder housing from end
cover. Failure to comply may result in injury
to personnel.
(4) Remove cylinder housing (3) from end cover (4).
16-280
