TM 9-2320-366-34-3
(3) Remove two screws (4) and plate (5) from swing drive
assembly (6).
(4) Install swing drive assembly bracket on swing drive
assembly (6) with two screws (4).
WARNING
Swing drive assembly weighs approximately
70 lbs (32 kgs). Attach a suitable lifting
device prior to removal. Failure to comply
may result in injury to personnel or damage
to equipment.
CAUTION
Use caution when lowering swing drive
assembly past cables and hoses. Failure to
comply may result in damage to equipment.
(5) Remove nine screws (7), washers (8), and swing drive
assembly (6) from crane assembly (9).
16-279
