TM 9-2320-366-34-3
NOTE
All control valve bodies are disassembled the
same way. Lift Control valve body shown.
(13) Remove lever (22) from pinion seal (23).
(14) Remove four screws (24) and valve body (3) from valve
manifold (25).
(15) Remove two preformed packings (26) and five preformed
packings (27) from valve manifold (25).
Discard
preformed packings.
(16) Remove knob (28) and nut (29) from lever (22).
NOTE
Perform
steps
(17)
through
(19)
on
Telescope and Lift Control lever caps.
(17) Remove dust cap (30) and washer (31) from setscrew
(32).
NOTE
Count number of threads shown on setscrew
and record for assembly.
(18) Remove nut (33) and washer (34) from setscrew (32).
(19) Remove setscrew (32) from lever cap (35).
16-149
