TM 9-2320-366-34-3
16-5. M1084/M1086 BOOM MID SECTION AND TELESCOPIC CYLINDER
REPLACEMENT/ADJUSTMENT
This task covers:
a. Removal
b. Cleaning/Inspection
c. Installation
d. Adjustment
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Boom fly section removed (para 16-4).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Sling, Cargo (Item 56, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Caliper Set, Micrometer, Outside (Item 9, Appendix
B)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Gloves, Rubber (Item 26, Appendix B)
Materials/Parts
Cap and Plug Set (Item 17, Appendix C)
Rag, Wiping (Item 60, Appendix C)
Solvent, Dry Cleaning (Item 83, Appendix C)
Rope, Fibrous (Ir\tem 62, Appendix C)
Grease, Ord, Extreme Pressure (Item 38, Appendix
C)
Sealing Compound (Item 76, Appendix C)
Packing, Preformed (2) (Item 262, Appendix F)
Packing, Preformed (2) (Item 237, Appendix F)
Dispenser, Pressure Sensitive Adhesive Tape (Item
30, Appendix C)
Personnel Required
(2)
a. Removal.
(1) Remove two screws (1), spacer block (2), and shim(s)
(3) from outer end of boom base section (4).
16-26
