TM 9-2320-366-34-3
15-2. CAB REPLACEMENT (CONT)
NOTE
Perform step (52) on M1084, M1086, M1090,
and M1094.
(52) Route crane/dump power cable assembly (76) inside
dashboard (83).
NOTE
Perform step (53) on vehicles equipped with
PTO.
(53) Route PTO cable assembly (77) inside dashboard (83).
(54) Position power distribution panel 24 vdc cable (78),
power distribution panel 12 vdc cable (79), rear lights
cable assembly (80), and front lights cable assembly (81)
in dashboard (83).
NOTE
Steps (55) and (56) require the aid of an
assistant.
(55) Position start and charging cable assembly (84), engine
control cable assembly (85), and grommet (86) in cab
(2).
(56) Position vacuum hose (87) in cab (2).
(57) Connect connector P119 (88) to connector J119 (89).
NOTE
Install plastic cable ties as required.
(58) Position start and charging cable assembly (84) and
engine control cable assembly (85) in dashboard (83).
(59) Position vacuum hose (87) in dashboard (83).
15-56
Change 1
