TM 9-2320-366-34-3
15-2. CAB REPLACEMENT (CONT)
(41) Connect two hoses (61) to 90-degree fittings (62).
(42) Connect two hoses (63) to 45-degree fittings (64).
(43) Connect hose (65) to tee fitting (66).
(44) Install terminal lugs TL201 (67) and TL202 (68) on air
pressure transmitter (69) with two lockwashers (70) and
nuts (71).
WARNING
Adhesives,
solvents,
and
sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in well-ventilated area.
If
adhesive, solvent, or sealing compound
gets
on
skin
or
clothing,
wash
immediately with soap and water. Failure
to comply may result in serious injury or
death to personnel.
(44.1) Apply sealing compound to nuts (71), lockwashers (70)
and terminal lugs TL201 (67) and TL202 (68).
NOTE
Perform steps (44.2) and (44.3) on vehicle
serial number 7448 and higher and vehicle
serial numbers 0001 through 7447 that have
previously had front lights cable assembly
replaced.
(44.2) Install boot (71.1) on low pressure transmitter (69).
(44.3) Apply antiseize to holes TLR and TTR and around edges
of boot (71.1).
15-54
Change 1
