TM 9-2320-366-34-2
13-41. M1088 RAMP REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Rear shock absorbers removed (TM 9-2320-
366-20-4).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix
B)
Wrench Set, Socket (Item 84, Appendix B)
Socket Set, Impact (Item 58, Appendix B)
Tools and Special Tools (Cont)
Wrench, Impact, Electric (Item 88, Appendix B)
Materials/Parts
Nut, Self-locking (4) (Item 211, Appendix F)
Bolt (2) (Item 9, Appendix F)
Bolt (2) (Item 10, Appendix F)
Personnel
(2)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris. Failure to
comply may result in injury to personnel.
a. Removal.
CAUTION
When removing bolts, continuous removal of
collars is mandatory. Failure to comply may
result in seizing of collar to bolt.
NOTE
• Left and right side ramps are removed the
same way. Left side shown.
• Steps (1) and (2) require the aid of an
assistant.
(1) Remove two collars (1), bolts (2), and front shock
absorber bracket (3) from frame rail (4). Discard collars
and bolts.
(2) Remove two collars (5), bolts (6), rear shock absorber
bracket (7), and ramp (8) from frame rail (4). Discard
collars and bolts.
13-381
