TM 9-2320-366-34-2
3-3. ENGINE ASSEMBLY REPLACEMENT (CONT)
(44) Deleted.
(45) Install plug (53) in flywheel housing (13.3).
NOTE
• Steps (46) and (47) require the aid of an
assistant.
• During installation of flexplate bolts, access each
flexplate bolt by turning alternator pulley through
a series of short arcs.
• Perform steps (46) through (49) on vehicles
serial number 0001 through 1477.
(46) Remove four screws (56), washers (57), and flywheel
cover (58) from flywheel housing (13.3).
(47) Position 12 bolts (59) in flexplate (55).
(48) Tighten 12 bolts (59) to 18-22 lb-ft (24-28 N·m).
NOTE
Perform step (49) on vehicles equipped with
transmission oil cooler tubes.
(49) Position gasket (60) and flywheel cover (58) on flywheel
housing (13.3) with four washers (57) and screws (56).
(50) Deleted.
3-42
Change 1
