TM 9-2320-366-34-2
(68) Position heater hose (83) on tube (84) with clamp (85).
(68.1) Tighten clamp (85) to 12-18 lb-in. (1-2 N·m).
(69) Remove two screws (86) and washers (87) from inlet
manifold (27).
(70) Position two clamps (88) on inlet manifold (27) with two
washers (87) and screws (86).
(71) Tighten two screws (86) to 15-25 lb-ft (20-34 N·m).
(72) Remove screw (89) and washer (90) from air inlet elbow
(91).
(73) Position clamp (92) on air inlet elbow (91) with washer
(90) and screw (89).
(74) Tighten screw (89) to 15-25 lb-ft (20-34 N·m).
Change 1
3-45