TM 9-2320-366-34-2
13-23. FRONT LIFTING BRACKET REPLACEMENT (CONT)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris.
Failure to
comply may result in injury to personnel.
(6) Position lower front lifting bracket support crossmember
(6) on front lifting bracket (1) with four screws (7) and
self-locking nut (8).
(7) Tighten four self-locking nuts (8) to 117-131 lb-ft (259-
178 N·m).
(8) Position four lockwashers (9) and screws (10) in
crossmember (11).
(9) Tighten four screws (10) to 48-58 lb-ft (65-79 N·m).
WARNING
Lifting beam weighs approximately 75 lbs
(34 kgs). Attach a suitable lifting device
prior to installation. Failure to comply
may result in injury to personnel or
damage to equipment.
(10) Position lifting beam (12) in front lifting bracket (1) with
two pins (13).
(11) Perform step (10) on left side of front lifting bracket.
13-190
