TM 9-2320-366-34-2
d. M1088 Installation.
NOTE
Left and right side of rear crossmember is
installed the same way. Left side shown.
Steps (1) through (5) require the aid of an
assistant.
(1) Position rear crossmember (1) on vehicle with five bolts
(2) and self-locking nuts (3).
(2) Tighten five self-locking nuts (3) to 210-225 lb-ft (285-
305 N·m).
(3) Position bolt (4) and self-locking nut (5) in rear
crossmember (1).
(4) Tighten self-locking nut (5) to 210-225 lb-ft (285-305
N·m).
(5) Perform steps (1) through (4) on right side of rear
crossmember.
13-37