TM 9-2320-366-34-2
(16) Install steering gear arm universal joint (13) on steering
gear input shaft (14).
(17) Position bolt (15) and self-locking nut (16) on universal
joint (13).
(18) Tighten self-locking nut (16) to 32-39 lb-ft (43-53 N m).
(19) Install drag link end (17) in steering pitman arm (2).
(20) Position nut (18) on drag link end (17).
(21) Tighten nut (18) to 232-284 lb-ft (315-385 N m).
NOTE
After tightening nut to correct torque, tighten
again until hole in drag link end is aligned
with slots in nut.
(22) Install cotter pin (19) in nut (18).
(23) Install power steering supply hose (20) on supply port
adapter (5).
12-7
