TM 9-2320-366-34-2
11-2. AIR COMPRESSOR REPLACEMENT (CONT)
b. Installation.
(1) Place air compressor (1) in vise.
(2) Position spur gear (2) on air compressor (1) with washer
(3) and nut (4).
(3) Tighten nut (4) to 107-129 lb-ft (145-175 N·m).
WARNING
Adhesives, solvents, and sealing compounds
can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep
away from open fire and use in a well-
ventilated area.
If adhesive, solvent, or
sealing compound gets on skin or clothing,
wash immediately with soap and water.
Failure to comply may result in injury to
personnel.
(4) Apply sealing compound to threads of two fittings (5) and
45-degree fitting (6).
(5) Install two fittings (5) in air compressor (1).
(6) Install 45-degree fitting (6) in air compressor (1).
(7) Apply sealing compound to threads of 90-degree fittings
(7, 8, and 9).
(8) Install 90-degree fittings (7, 8, and 9) in air compressor
(1).
(9) Apply sealing compound to threads of adapter (10).
(10) Install adapter (10) in air compressor (1).
11-6
