TM 9-2320-366-34-2
Section II. MAINTENANCE PROCEDURES
11-2. AIR COMPRESSOR REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Power steering pump removed (TM 9-2320-366-20-4).
Air tanks drained (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Pan, Drain (Item 43, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Wrench, Torque, 0-150 lb-in. (Item 91, Appendix B)
Wrench Set, Socket (Item 85, Appendix B)
Vise, Machinist (Item 82, Appendix B)
Caps, Vise Jaw (Item 12, Appendix B)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 30, Appendix C)
Antifreeze (Item 11, Appendix C)
Sealing, Compound (Item 72, Appendix C)
Nut, Self-Locking (Item 214, Appendix F)
Gasket (Item 51, Appendix F)
Personnel Required
(2)
a. Removal.
(1) Remove radiator cap (1) from radiator overflow tank (2).
(2) Position drain pan under radiator draincock (3).
(3) Drain approximately 15-20 qt (14-19 L) of coolant from
radiator (4).
(4) Close radiator draincock (3) on radiator (4).
(5) Loosen hose clamp (5) on air hose (6).
(6) Disconnect air hose (6) from 45-degree fitting (7).
(7) Disconnect air hose (8) from 90-degree fitting (9).
(8) Disconnect coolant hose (10) from 90-degree fitting (11).
11-2
Change 1
