TM 9-2320-366-34-2
10-9. REAR AXLE DIFFERENTIAL CARRIER REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Rear axle shaft removed (TM 9-2320-366-20-4).
Rear axle differential carrier drained (TM 9-2320-366-
20).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Lift, Transmission/Differential (Item 39, Appendix B)
Wrench Set, Socket (TM 9-2320-366-20)
Pan, Drain (Item 43, Appendix B)
Tools and Special Tools (Cont)
Sling, Cargo (Item 56, Appendix B)
Hammer, Hand, Soft Head (Item 33, Appendix B)
Materials/Parts
Sealant, Adhesive (Item 51, Appendix C)
Screw, Cap (4) (Item 366.1, Appendix F)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris.
Failure to
comply may result in injury to personnel.
a. Removal.
(1) Remove four screws (1) and two bearing cups (2) from
drive yoke (3). Discard screws.
(2) Slide drive shaft (4) from side to side and separate
universal joint (5) from drive yoke (3).
NOTE
Step (3) requires the aid of an assistant.
(3) Attach drive shaft (4) to frame (6).
Change 1
10-59
