TM 9-2320-366-34-2
10-2. INTERMEDIATE AXLE ASSEMBLY REPLACEMENT (CONT)
(5) Install pin (4) on intermediate differential carrier (5).
(6) Position V-rod control arm mounting plate (6) on
intermediate differential carrier (5) with four bolts (7).
(7) Tighten four bolts (7) to 398-486 lb-ft (540-659 N m).
WARNING
Adhesive Sealant MIL-S-46163 can damage
your eyes. Wear safety goggles when using;
avoid contact with eyes. If sealant contacts
eyes, flush eyes with water and get
immediate medical attention.
Failure to
comply may result in injury to personnel.
(8) Apply sealing compound to threads of bolt (8).
(9) Position washer (9) and bolt (8) in clevis assembly (10).
(10) Tighten bolt (8) to 35-43 lb-ft (48-58 N·m).
10-12
