TM 9-2320-366-34-2
10-2. INTERMEDIATE AXLE ASSEMBLY REPLACEMENT (CONT)
(60) Loosen two bolts (70) on V-rod control arm mounting
plate (71).
(61) Remove two bolts (72) and V-rod control arm mounting
plate (71) from intermediate differential carrier (14).
(62) Remove pin (73) from intermediate differential carrier
(14).
NOTE
Left and right side spring mounts are
removed the same way. Left side shown.
(63) Remove spring mount (74) from intermediate axle
assembly (18).
(64) Remove pin (75) from intermediate axle assembly (18).
(65) Perform steps (63) and (64) on right side spring mount.
10-10
Change 1
