TM 9-2320-366-34-2
NOTE
• Perform steps (27) through (29) on vehicle
serial numbers 1478 and higher.
• Steps (27) and (28) require the aid of an
assistant.
• During installation of flexplate bolts, access
each flexplate bolt by turning alternator pulley
through a series of short arcs.
(27) Position six bolts (22) in flexplate (23).
(28) Tighten six bolts (22) to 37-45 lb-ft (51-61 N·m).
(29) Install plug (24) in flywheel housing (25).
NOTE
• Steps (30) and (31) require the aid of an
assistant.
• During installation of flexplate bolts, access
each flexplate bolt by turning alternator pulley
through a series of short arcs.
(30) Position 12 bolts (26) in flexplate (23).
(31) Tighten 12 bolts (26) to 18-22 lb-ft (24-30 N·m).
NOTE
Perform step (32) on vehicles equipped
with transmission oil cooler tubes.
(32) Position gasket (27) and flywheel cover (28) on
flywheel housing (25) with four washers (29), and
screws (30).
NOTE
Perform step (33) on vehicles equipped
with transmission oil cooler hoses.
(33) Position gasket (27), flywheel cover (28), transmission
oil cooler hose bracket (31) on flywheel housing (25)
with four washers (29) and screws (30).
(34) Tighten four screws (30) to 21-25 lb-ft (30-35 N·m).
Change 1
7-127
