TM 9-2320-366-34-2
7-18. TRANSMISSION ASSEMBLY REPLACEMENT (UNUSUAL CONDITIONS) (CONT)
(17) Position 12 washers (14) and bolts (15) in torque
converter housing module (16).
(18) Tighten 12 bolts (15) to 37-45 lb-ft (50-61 N·m).
NOTE
Perform steps (19) and (20) if vehicle is
equipped with PTO.
(19) Position preformed packing (17) on 90-degree fitting
(18).
(20) Install 90-degree fitting (18) on transmission (2).
NOTE
Perform steps (21) through (23) on models
M1084/M1086, M1090, and M1094.
(21) Remove bolt (19) from transfer case housing (20).
(22) Position bracket (21) on transfer case housing (20)
with bolt (19).
(23) Tighten bolt (19) to 44-55 lb-ft (59-74 N·m).
(24) Remove five bolts (8) and transmission lifting bracket
from adapter housing module (9).
(25) Position five bolts (8) in adapter housing module (9).
(26) Tighten five bolts (8) to 42-50 lb-ft (57-68 N·m).
7-126
Change 1
