TM 9-2320-366-34-2
7-18. TRANSMISSION ASSEMBLY REPLACEMENT (UNUSUAL CONDITIONS) (CONT)
NOTE
Perform steps (42) and (43) on vehicle
serial numbers 7162 and higher.
(42) Remove plug (66) from flywheel housing (62).
NOTE
• Step (43) requires the aid of an assistant.
• During removal of flexplate bolts, access each
flexplate bolt by turning alternator pulley
through a series of short arcs.
(43) Remove six bolts (67) from flexplate (65).
(44) Remove five bolts (68) from adapter housing module
(69).
NOTE
Transmission lifting bracket is installed with
lift eye top-dead-center facing forward.
(45) Position transmission lifting bracket on adapter housing
module (69) with five bolts (68).
(46) Tighten five bolts (68) to 42-50 lb-ft (57-68 N·m).
7-120
Change 1
