TM 9-2320-366-34-2
(35) Loosen two clamps (50) on tube (51) and oil fill hose
(52).
(36) Remove oil fill hose (52) from oil fill tube (53) and tube
(51).
(37) Remove screw (54), oil fill tube clamp (55) and oil fill
tube (53) from main housing module (56).
(38) Remove seal (57) from oil fill tube (53). Discard seal.
NOTE
Perform step (39) on vehicles equipped
with transmission oil cooler tubes.
(39) Remove four screws (58), washers (59), flywheel cover
(60), and gasket (61) from flywheel housing (62).
Discard gasket.
NOTE
Perform step (40) on vehicles equipped
with transmission oil cooler hoses.
(40) Remove four screws (58), washers (59), transmission
oil cooler hose (63), flywheel cover (60), and gasket
(61) from flywheel housing (62). Discard gasket.
NOTE
Perform step (41) on vehicles serial number
0001 through 7161.
Step (41) requires the aid of an assistant.
During removal of flexplate bolts, access each
flexplate bolt by turning alternator pulley
through a series of short arcs.
(41) Remove 12 bolts (64) from flexplate (65).
Change 1
7-119
