TM 9-2320-366-34-2
NOTE
Perform steps (5) through (8) on serial number
6510032369 and higher.
(5) Install clip (12) on transmission adapter harness (13).
(6) Remove nut (14) and washer (15) from transmission
adapter harness (13).
(7) Install transmission adapter harness (13) in bracket
(16) with washer (15) and nut (14).
(8) Connect transmission external wiring harness
connector (17) to transmission adapter harness (13).
CAUTION
Due to position of main housing module
connector, extreme care must be taken when
installing main transmission external
connector. Failure to comply may result in
damage to equipment.
NOTE
Perform steps (9) through (11) on
transmissions prior to serial number
6510032369.
(9) Position connector (18) in main housing module (3)
with connector bolt (19).
(10) Tighten connector bolt (19) to 12-24 lb-in. (1-3 N·m).
(11) Install two screws (20) in main housing module (3).
7-75