TM 9-2320-366-34-2
6-8. TRANSMISSION EXTERNAL WIRING HARNESS REPLACEMENT (CONT)
b. Installation
CAUTION
Due to position of main housing module
connector, extreme care must be taken when
installing
transmission
adapter
cable
assembly connector. Failure to comply may
result in damage to equipment.
(1) Position transmission adapter cable assembly (1) in main
housing module receptacle (2) with bolt (3).
(2) Tighten bolt (3) to 12-24 lb-in. (1-3 N·m).
(3) Remove nut (4) and washer (5) from transmission
adapter cable assembly (1).
(4) Install transmission adapter cable assembly (1) on
bracket (6) with washer (5) and nut (4).
(5) Connect transmission external wiring harness connector
(7) to transmission adapter cable assembly (1).
c. Follow-on Maintenance
Operate vehicle and verify proper transmission operation
(TM 9-2320-366-10-1).
End of Task.
6-44
