TM 9-2320-366-34-2
5-3. ENGINE FAN CLUTCH REPAIR (P/N 1090-08000-01) (CONT)
WARNING
Clutch housing is assembled under
tension. Use caution during disassembly.
Failure to comply may result in injury to
personnel.
(5) Attach two C-clamps to clutch housing (4).
(6) Remove six screws (8), lockwashers (9), and three
retaining plates (10) from clutch housing (4). Discard
screws and lockwashers.
WARNING
Loosen C-clamps slowly and evenly to
release tension.
Failure to comply may
result in injury to personnel or damage to
equipment.
(7) Remove C-clamps from clutch housing (4) and shaft
mount (11).
(8) Remove shaft mount (11) from clutch housing (4).
(9) Remove lining (12) from clutch housing (4). Discard
lining.
(10) Remove front spring cap (13), spring (14), and rear
spring cap (14.1) from shaft (15). Discard spring and rear
spring cap.
5-4
Change 1
