TM 9-2320-366-34-2
4-4. FUEL SETTING CHECK (CONT)
NOTE
Lubricate sleeve with engine oil if required.
(25) Slide adapter sleeve (11) into fuel governor (12) and
install clip (10).
(26) Remove bolt (5) and dial indicator group from cylinder
head (3).
(27) Install bolt (4) in cylinder head (3).
CAUTION
Hold rocker arm assembly level when
installing on engine to prevent disassembly.
Failure to comply may result in damage to
equipment.
(28) Install No. 1 cylinder rocker arm (2) on cylinder head (3).
(29) Position four bolts (1) in No. 1 cylinder rocker arm (2).
(30) Tighten four bolts (1) to 180-300 lb-in. (20-34 N·m).
4-16
