TM 9-2320-366-34-2
3-16. OIL PAN REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-3220-366-10-1).
Coolant drained (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Wrench, Torque, 0-300 lb-in. (Item 95, Appendix B)
Container (Capacity 25 qt (24 L)
Hammer, Hand, Soft Head (Item 33, Appendix B)
Tools and Special Tools (Cont)
Goggles, Industrial (Item 28, Appendix B)
Materials/Parts
Packing, Preformed (Item 248, Appendix F)
Gasket (Item 34, Appendix F)
Packing, Preformed (Item 259, Appendix F)
Cap and Plug Set (Item 17, Appendix C)
Lubricating Oil, Engine (Item 46, Appendix C)
Cement, Gasket (Item 34, Appendix C)
Sealing Compound (Item 74, Appendix C)
Personnel Required
(2)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris.
Failure to
comply may result in injury to personnel.
a. Removal.
(1) Position container under drain plug (1).
(2) Remove drain plug (1) from oil pan (2).
(3) Remove preformed packing (3) from drain plug (1).
Discard preformed packing.
3-108
