TM 9-2320-366-34-2
3-15. ENGINE FRONT COVER REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Radiator drained (TM 9-2320-366-10-1).
Transmission oil cooler tube removed (TM 9-2320-366-
20-4).
Upper coolant tube removed (TM 9-2320-366-20-3).
Air compressor inlet and outlet coolant tubes removed
(TM 9-2320-366-20-3).
Engine fan and fan clutch removed (TM 9-2320-366-
20-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix
B)
Materials/Parts
Gasket (Item 48, Appendix F)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 30, Appendix C)
a. Removal.
(1) Remove screw (1) and bracket (2) from engine front
housing (3).
(2) Remove screw (4) and bracket (5) from engine front
cover (6).
(3) Remove 13 screws (7) from engine front cover (6).
(4) Remove two screws (8), washers (9), engine front cover
(6), and gasket (10) from engine front housing (3).
Discard gasket.
3-105
