TM 9-2320-366-34-2
3-13. CAM ROLLER FOLLOWERS REPLACEMENT
This task covers:
a. Removal
b. Disassembly
c. Cleaning/Inspection
d. Assembly
e. Installation
f. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Rocker arms and push rods removed (para
3-12).
Fuel filter removed (TM 9-2320-366-20-3).
Fuel governor removed (para 4-9).
Air compressor removed (para 11-2).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Wrench, Torque, 0-300 lb-in. (Item 95, Appendix
B)
Adapter, Socket Wrench (Item 3, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Gloves, Rubber (Item 26, Appendix B)
Tools and Special Tools (Cont)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Socket Wrench Attachment, Screwdriver (TM 9-2320-
366-20)
Wrench Set, Socket (Item 85, Appendix B)
Materials/Parts
Gasket (Item 41, Appendix F)
Gasket (3) (Item 50, Appendix F)
Dispenser, Pressure Sensitive Adhesive Tape (Item
30, Appendix C)
Solvent, Dry Cleaning (Item 83, Appendix C)
Rag, Wiping (Item 60, Appendix C)
a. Removal.
(1) Loosen hose clamp (1) on oil fill hose (2).
(2) Remove oil fill hose (2) from oil fill tube (3).
(3) Remove two screws (4), washers (5), oil fill tube (3), and
gasket (6) from center side cover (7). Discard gasket.
3-95
