TM 9-2320-366-34-2
3-12. ROCKER ARM AND PUSH ROD REPLACEMENT/REPAIR (CONT)
d. Assembly.
NOTE
• Lubricate with lubricating oil all parts prior to
assembly.
• Valve adjustment screws are installed from
bottom side of rocker arms.
(1) Position two valve adjustment screws (1) in rocker arms
(2 and 3).
(2) Install two jam nuts (4) on valve adjustment screws (1).
NOTE
Injector adjustment screw is installed from
bottom side of unit arm.
(3) Position injector adjustment screw (5) in unit arm (6).
(4) Position jam nut (7) on injector adjustment screw (5).
(5) Install retainer ring (9) and arm button (8) on unit arm
(6).
(6) Install rocker arm (2) on shaft arm (10).
(7) Install unit arm (6) on shaft arm (10).
(8) Install rocker arm (3) on shaft arm (10).
(9) Install shaft support (11) on shaft arm (10).
3-92
