TM 9-2320-366-34-2
D-39. COMPRESSOR HOSE FABRICATION 12417926
Cut compressor hoses from bulk hose using a fine-toothed hacksaw or suitable cutting device. Assemble the cut hoses
to the fittings. The following table lists the hoses and the components from which the assemblies are made.
Hose Assembly
Part Number
Bulk Hose
Part Number
Cutoff Length
in inches (cm)
Fitting A
Fitting B
12417926-001
SAE 100R14-10
110 (279.4)
SAE 30011010
SAE 30011010
12417926-002
SAE 100R14-10
16.5 (41.9)
SAE 30011010
SAE 30011010
12417926-004
SAE 100R14-4
16.5 (41.9)
SAE 300144
SAE 300144
D-40. STEERING GEAR RETURN HOSE AND TRANSMISSION OIL COOLER HOSES
FABRICATION
Cut the following hoses from bulk hose using a fine-toothed hacksaw or suitable cutting device.
Hose Part Number
Bulk Hose Part Number
Cut Length
inches
cm
12418037
A110 (30327)
75.5
191.7
12418460-001
MS521302B110360 (96906)
17.5
44.4
12418460-002
MS521301A206R (96906)
16.0
40.6
D-41. LANYARD ASSEMBLIES P/N 12418763 AND 12420196 FABRICATION
Make the following lanyard assemblies from bulk cable material, sleeves, and tab material and assemble according to
Figure D-56. Lanyard Assembly. The following parts list identifies part numbers and lengths of cut pieces.
Item
Part Number
Material Description
Size
Qty
1
MIL-W-83420 Type 1,
Comp B
1/16 in. stranded wire
cable
4 in. (102 mm)
1
2
MS51844-22
Sleeve
2
3
N/A
Tab, Stainless Steel ASTM
A617
0.06 in. (1.5 mm) X 0.37 in. (9.5 mm) X
1.25 in. (32 mm)
1
D-69
