2-1012 TM 9-2320-366-34-1 h8.  PAY-OUT HYDRAULIC MOTOR DOES NOT WORK INITIAL SETUP   Equipment Conditions     Engine shut down (TM 9-2320-366-10-1).   Materials/Parts     Rag, Wiping (Item 60, Appendix C)     Hose (2) (Item 40, Appendix C)     Fitting (2) (Item 31, Appendix C)     Reducer, Tube (Item 61, Appendix C) Tools and Special Tools   Tool Kit, Genl Mech (Item 78, Appendix B)   Tester, Hydraulic (Item 73, Appendix B)   Goggles, Industrial (Item 28, Appendix B)   Pan, Drain (Item 43, Appendix B) Personnel Required   (2) 1.             KNOWN INFO              Hydraulic oil level OK. Hydraulic hoses, tubes, and fittings OK. Filter screen OK. Hydraulic filter OK. 30K winch assembly OK.        POSSIBLE PROBLEMS        Faulty three stage hydraulic pump. Faulty monoblock valve   assembly. Faulty pay-out hydraulic motor.            TEST OPTIONS            Three Stage Hydraulic Pump Flow Test     REASON FOR QUESTION     If three stage hydraulic pump is not providing enough flow, hydraulic system will not operate correctly. Replace three stage hydraulic pump (para 16-92). YES NO WARNING Read WARNING on following page. START Is 14 gpm measured at supply hose on three stage hydraulic pump?