TM 9-2320-366-34-2
CAUTION
When removing bolts, continuous removal of
collars is mandatory. Failure to comply will
result in seizing of collar to bolt.
(7) Remove 17 collars (23), bolts (24), and frame plate (4)
from vehicle. Discard collars and bolts.
b. LH Installation.
NOTE
Steps (1) through (11) requires the aid of an
assistant.
(1) Position frame plate (1) on vehicle with 17 bolts (2) and
self-locking nuts (3).
(2) Tighten 17 self-locking nuts (3) to 77-92 lb-ft (105-125
N·m).
NOTE
Install bolts in positions noted during removal.
(3) Position eight bolts (4) and self-locking nuts (5) in frame
plate (1).
(4) Tighten eight self-locking nuts (4) to 210-225 lb-ft (285-
305 N·m).
(5) Position three brackets (6) on frame plate (1) with three
bolts (7) and self-locking nuts (8).
(6) Tighten three self-locking nuts (8) to 77-92 lb-ft (105-125
N·m).
13-121