TM 9-2320-366-34-2
NOTE
Install bolts in positions noted during removal.
(9) Position maintenance leg bracket (9) on frame plate (1)
with two bolts (10) and self-locking nuts (11).
(10) Tighten two self-locking nuts (11) to 35-42 lb-ft (47-58
N·m).
(11) Position rear torque arm bracket (12) on frame plate (1)
with eight bolts (13) and self-locking nuts (14).
(12) Tighten eight self-locking (14) to 390-510 lb-ft (529-691
N·m).
(13) Position screw (15) in frame plate (1) with lockwasher
(16) and self-locking nut (17).
(14) Tighten self-locking nut (17) to 84-108 lb-in. (10-12 N·m).
(15) Position clamp (18) and terminal lug TL92 (19) on screw
(15) with self-locking nut (20).
(16) Tighten self-locking nut (20) to 84-108 lb-in. (10-12 N·m).
(17) Position clamp (21) on frame plate (1) with bolt (22) and
self-locking nut (23).
(18) Tighten self-locking nut (23) to 84-108 lb-in. (10-12
N·m).
13-117