TM 9-2320-366-34-2
(11) Position screw (15) in frame plate (1) with lockwasher
(16) and self-locking nut (17).
(12) Tighten self-locking nut (17) to 84-108 lb-in. (10-12 N·m).
(13) Position clamp (18) and terminal lug TL93 (19) on screw
(15) with self-locking nut (20).
(14) Tighten self-locking nut (20) to 84-108 lb-in. (10-12 N·m).
(15) Position two clamps (21) on frame plate (1) with two
bolts (22) and self-locking nuts (23).
(16) Tighten two self-locking nuts (23) to 84-108 lb-in. (10-12
N·m).
c. RH Removal.
(1) Remove self-locking nut (1), bolt (2), and clamp (3), from
frame plate (4). Discard self-locking nut.
13-113