TM 9-2320-366-34-2
13-11. M1083/M1093/M1090/M1094 STRUCTURAL SUPPORT REPLACEMENT (CONT)
NOTE
Perform steps (11) and (12) on vehicle serial
numbers 1399 through 2987.
(11) Position three washers (17), bolt (18), and self-locking
nut (19) in rear axle shock absorber (20).
(12) Tighten self-locking nut (19) to 195-239 lb-ft (264-324
N·m).
NOTE
Perform steps (13) and (14) on vehicle serial
numbers 0001 through 1398 and 2988 and
higher serial numbers.
(13) Position washer (21), bolt (18), and self-locking nut (19)
in rear axle shock absorber (20).
(14) Tighten self-locking nut (19) to 195-239 lb-ft (264-324
N·m).
NOTE
Install plastic cable ties as required.
(15) Position valve control panel (22) on structural support (1)
with three washers (23), bolts (24), washers (25), and
self-locking nuts (26).
(16) Tighten three self-locking nuts (26) to 14-18 lb-ft (20-24
N·m).
(17) Perform steps (1) through (16) on left side of structural
support (1).
13-74