TM 9-2320-366-34-2
Section II. MAINTENANCE PROCEDURES
9-2. FRONT AXLE ASSEMBLY REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Air tanks drained (TM 9-2320-366-10-1).
Gravel deflector and gravel deflector extension
removed (TM 9-2320-366-20-4).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Wrench Set, Socket (Item 84, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)
Multiplier, Torque Wrench (Item 42, Appendix B)
Trestle, Motor Vehicle Maintenance (2) (Item 81,
Appendix B)
Lift, Transmission/Differential (Item 39, Appendix B)
Jack, Dolly Type, Hydraulic (Item 37, Appendix B)
Socket, Left Front Leaf Spring U-Bolt (Item 11,
Appendix D)
Puller Kit, Universal (Item 51, Appendix B)
Hammer, Hand, Soft Head (Item 33, Appendix B)
Tools and Special Tools (Cont)
Puller, Mechanical (Item 53, Appendix B)
Sling, Cargo (Item 56, Appendix B)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 30, Appendix C)
Nut, Self-Locking (2) (Item 202, Appendix F)
Pin, Cotter (2) (Item 328, Appendix F)
Nut, Self-Locking (8) (Item 198, Appendix F)
Washer (2) (Item 431, Appendix F)
Bracket (2, if required) (Item 21, Appendix F)
Washer, Brake Housing (2, if required) (Item
436, Appendix F)
Screw, Cap (4) (Item 366.1, Appendix F)
U-bolt (4) (Item 20.3, Appendix F)
Personnel Required
(3)
WARNING
Wear appropriate eye protection when
working under vehicle due to possibility
of falling debris. Failure to comply may
result in injury to personnel.
a. Removal.
(1) Deleted.
(2) Deleted.
9-2
Change 1
