7-4. TRANSMISSION ASSEMBLY REPLACEMENT (USUAL CONDITIONS) (CONT)
Tag electrical connections and connection
points prior to disconnecting.
Remove plastic cable ties as required
(23) Disconnect engine speed sensor connector (28) from
engine speed sensor (29).
(24) Disconnect output speed sensor connector (30) from
transfer case module (31).
Due to position of main housing module
connector, extreme care must be taken
when removing main transmission external
connector. Failure to comply may result in
damage to equipment.
Perform steps (25) and (26) on
transmission serial numbers prior to
(25) Loosen connector bolt (32) on main transmission
external connector (33).
(26) Remove main transmission external connector (33)
from main housing module receptacle (34).