TM 9-2320-366-34-4
(4) Remove thrust plate (5) from port end cover (1).
(5) Remove six seals (6) from thrust plate (5). Discard
seals.
(6) Remove two roller bearings (7) from port end cover (1).
(7) Remove ring seal (8) from port end cover (1).
(8) Match mark third stage gear housing (2) to second and
third stage bearing carrier (9).
(9) Remove third stage gear housing (2) from second and
third stage bearing carrier (9).
(10) Remove two gasket seals (10) from third stage gear
housing (2). Discard gasket seals.
(11) Remove drive gear (11) and driven gear (12) from
second and third stage bearing carrier (9).
(12) Remove pressure port plug (13) from second and third
stage bearing carrier (9). Discard pressure port plug.
26-3
