TM 9-2320-366-34-4
25-5. M1089 TELESCOPIC LIFT CYLINDER REPAIR
This task covers:
a. Disassembly
b. Cleaning/Inspection
c. Assembly
INITIAL SETUP
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Pan, Drain (Item 43, Appendix B)
Caps, Vise Jaw (Item 12, Appendix B)
Vise, Machinists (Item 82, Appendix B)
Spanner Wrench Tool (Item 20, Appendix D)
Sling, Cargo (Item 56, Appendix B)
Materials/Parts
Tape, Antiseizing (Item 85, Appendix C)
Kit, Seal (Item 122, Appendix F)
Solvent, Dry Cleaning (Item 83, Appendix C)
Lubricating Oil, Engine (Item 46, Appendix C)
Rag, Wiping (Item 60, Appendix C)
Personnel Required
(2)
WARNING
Telescopic
lift
cylinder
weighs
approximately 180 lbs (89 kgs). Attach a
suitable lifting device prior to repair.
Failure to comply may result in injury to
personnel or damage to equipment.
a. Disassembly.
NOTE
Step (1) requires the aid of an assistant.
(1) Position telescopic lift cylinder (1) in vise.
(2) Place drain pan under telescopic lift cylinder (1).
(3) Extend inner cylinder rod (2) approximately 12 in. (31
cm).
25-19
