TM 9-2320-366-34-4
23-2. FRONT AXLE DIFFERENTIAL CARRIER REPAIR (CONT)
(29) Remove eight screws (32), pinion drive (25), and bearing
cage (29) from differential carrier housing (17).
(30) Remove two bearing spacers (27) from pinion drive (25).
(31) Install thinner pinion spacers (27) to increase preload.
(32) Install thicker pinion spacers (27) to decrease preload.
(33) Repeat steps (23) through (27) to determine if preload
on inner and outer bearing cones is within specifications.
(34) Remove self-locking nut (34) and input yoke (33) from
pinion drive (25). Discard self-locking nut.
23-14
Change 1
