TM 9-2320-366-34-4
Section II. MAINTENANCE PROCEDURE
23-2. FRONT AXLE DIFFERENTIAL CARRIER REPAIR
This task covers:
a. Disassembly
b. Cleaning/Inspection
c. Assembly
d. Adjustment
INITIAL SETUP
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Stand, Differential Carrier, Repair (TM 9-2320-366-20)
Puller Kit, Universal (Item 51, Appendix B)
Goggles, Industrial (Item 28, Appendix B)
Gloves, Rubber (Item 25, Appendix B)
Indicator Dial (Item 36, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)
Multiplier, Torque (Item 42, Appendix B)
Holding Bar, Pinion (TM 9-2320-366-20)
Press, Arbor, Hand Operated (Item 48, Appendix B)
Wrench Set, Socket (Item 84, Appendix B)
Puller Kit, Universal (TM 9-2320-366-20)
Caliper Set, Micrometer, Outside (Item 9,
Appendix B)
Socket Set, Impact (Item 58, Appendix B)
Wrench, Impact, Electric (Item 88, Appendix B)
Wrench, Torque, 0-75 lb-in. (Item 98, Appendix B)
Materials/Parts
Sealant, Adhesive (Item 66, Appendix C)
Sealant, Adhesive (Item 67, Appendix C)
Sealant, Adhesive (Item 68, Appendix C)
Adhesive (Item 5, Appendix C)
Compound, Sealing (Item 71, Appendix C)
Grease, Automotive and Artillery (GAA)
(Item 35, Appendix C)
Lubricating Oil Gear (Item 52, Appendix C)
Rag, Wiping (Item 60, Appendix C)
Nut, Self-Locking (Item 193, Appendix F)
Parts Kit, Seal Replacement (Item 386.1,
Appendix F)
Pin, Cotter (2) (Item 335, Appendix F)
Solvent, Dry Cleaning (Item 83, Appendix C)
Personnel Required
(2)
a. Disassembly.
WARNING
Front axle differential carrier weighs
approximately 350 lbs (159 kgs). Attach a
suitable lifting device prior to moving.
Failure to comply may result in injury to
personnel or damage to equipment.
NOTE
Step (1) requires the aid of an assistant.
(1) Install differential carrier (1) on differential carrier repair
stand.
23-2
Change 1
